 |
Xreo CB1 HDMI Extender Set is a HDMI extender using five coaxial cables as transmission media. This enables easy HDMI installation over a long distance. Full High-Resolution HDTV signals are supported up to a resolution of 1080P at a maximum distance of 100 meter. Installer will also have the ability to customize the length by using this extender set. The system will auto adjust feedback, equalization and amplifier, the user does not need to care about the length of the cable.
Fully HDCP Compliant
HDCP (high bandwidth digital content protection) is a standard encoded into the video signal to prevent it from being pirated. If a source device is HDCP coded and is connected to a HDMI display or projector without the correct HDCP decoding process, the picture is appear "sparkle" or in some cases, down-scaling to lower (480P) resolutions of the images. In order to see HDTV with HDCP compliance, both the source, the display and any device in between must be have HDMI connections that can proceed HDCP decoding.
How does it work
The transmitter unit sits close to a source, the receiver unit sits close to a HDTV display. Run five coaxial cables between the transmitter and receiver. When the source, the transmitter, the receiver and the display are all powered on and connected, the auto-adjusting extender requires no manual turning or settings.
Features:
* Extends high definition HDMI compliant devices up to 100 meters.
* Supports resolution up to 1080P.
* Works with HDMI 1.3b and HDCP compliant devices.
* Consumer Electronics Control (CEC).
* Supports xvYCC function.
* Extends range of HDMI by equalizing signals.
* Easy to install and simple to use.
Specifications:
* Video amplifier speed: 10.2 Gbps.
* Video amplifier bandwidth: 340MHz.
* Up to 36bit color depth.
* Input video signal: 1.2 Volts p-p.
* Input DDC signal: 5 Volts p-p (TTL).
* Connector I: HDMI type A 19-Pin female
* Connector II: BNC type.
* Power supply: DC5V
* Dimension: 109 x 63 x 30mm.
* Weight: 495g.
Package Contents:
* The HDMI over Coaxial transmitter
* The HDMI over Coaxial receiver
* DC5V power supply.
* User's manual.
Note:
- To achieve the best performance, shielded cables are recommended.
- Extender for HDMI 1.3 over CAT6 can also use CAT5e cables, but will be limited to shorter extension distances.
|
|
|
 |
Xreo CB1S HDMI Extender Set is a HDMI extender using a single coaxial cable as transmission media. This enables easy HDMI installation over a long distance. Full High-Resolution HDTV signals are supported up to a resolution of 1080P at a maximum distance of 100 meter. Installer will also have the ability to customize the length by using this extender set. The system will auto adjust feedback, equalization and amplifier, the user does not need to care about the length of the cable.
Fully HDCP Compliant
HDCP (high bandwidth digital content protection) is a standard encoded into the video signal to prevent it from being pirated. If a source device is HDCP coded and is connected to a HDMI display or projector without the correct HDCP decoding process, the picture is appear "sparkle" or in some cases, down-scaling to lower (480P) resolutions of the images. In order to see HDTV with HDCP compliance, both the source, the display and any device in between must be have HDMI connections that can proceed HDCP decoding.
How does it work
The transmitter unit sits close to a source, the receiver unit sits close to a HDTV display. Run a single coaxial cable between the transmitter and receiver. When the source, the transmitter, the receiver and the display are all powered on and connected, the auto-adjusting extender requires no manual turning or settings.
Features:
* Extends high definition HDMI compliant devices up to 100 meters.
* Supports resolution up to 1080P.
* Works with HDMI 1.3b and HDCP compliant devices.
* Consumer Electronics Control (CEC).
* Supports xvYCC function.
* Extends range of HDMI by equalizing signals.
* Easy to install and simple to use.
Specifications:
* Video amplifier speed: 10.2 Gbps.
* Video amplifier bandwidth: 340MHz.
* Up to 36bit color depth.
* Input video signal: 1.2 Volts p-p.
* Input DDC signal: 5 Volts p-p (TTL).
* Connector I: HDMI type A 19-Pin female
* Connector II: BNC type.
* Power supply: DC5V
* Dimension: TBD.
* Weight: TBD
Package Contents:
* The HDMI over Coaxial transmitter
* The HDMI over Coaxial receiver
* 2XDC5V power supply.
* User's manual.
Note:
- To achieve the best performance, shielded cables are recommended.
- Extender for HDMI 1.3 over CAT6 can also use CAT5e cables, but will be limited to shorter extension distances.
|
|
 |
Xreo F1 HDMI over Fiber allows an HDMI audio/video signal to be extended up to 300 meters using multimode LC-LC fiber optic cable. The F1 sender unit sits next to your set-top box or DVD player source. Cable supplier with the F1 connect your HDMITM 1.2 source to the sender unit. The display plugs into the back of the receiver unit. The LC fiber optic cable connects the Sender and the Receiver unit to each other. Fiber Optic technology allows F1 HDMI over Fiber Extender to carry audio/video signals over long distances that are not possible with other technologies. Fiber Optic cable is immune to audio/video signal corruption from electromagnetic interference(EMI), ensuring a crystal clear picture.
How does it work
The transmitter unit sits close to your source, the receiver unit sits close to your HDTV display. Run multimodel LC-LC fiber cable between the transmitter and receiver. When the source, the transmitter, the receiver and the display are all powered on and connected, the auto-adjusting extender requires no manual turning or settings, and pristine-quality 1080p HD video with multichannel digital audio is experienced in full splendor without data loss or noise
Features:
* Extends high definition HDMI compliant devices up to 300 meters.
* Supports resolution up to 720P @60Hz and 1080P @24Hz.
* HDMI 1.2 support: 8bit/channel RGB Deep color, CEC protocol.
* HDMI compliant with HDMI V1.2 Feature.
* Works with HDMI and HDCP compliant devices.
* Extends range of HDMI by equalizing signals.
* Easy to install and simple to use.
Specifications:
* Video amplifier speed: 6.75 Gbps.
* Video amplifier bandwidth: 225 MHz.
* Up to 24bit color depth
* Input video signal: 1.2 Volts p-p.
* Input DDC signal: 5 Volts p-p (TTL).
* HDMI connectors: type A 19-Pin female.
* Video link connector: LC
* USB connector: Type A and B, 4-Pin female.
* Power supply: 5CVDC 3A
* IR emitter length: 5Ft
* IR senser length: 3Ft
* Fiber Optic cable length: 30M
* Dimensions: 112 x 58 x 24mm
* Weight: 1200g
Package Contents:
* The HDMI over Fiber transmitter.
* The HDMI over Fiber receiver
* IR emitter cable
* IR senser cable
* Fiber Optic cable.
* 5VDC power supply.
* User's manual.
Note:
- To achieve the best performance, shielded cables are recommended.
- Extender for HDMI 1.3 over CAT6 can also use CAT5e cables, but will be limited to shorter extension distances.
|
|
 |
Xreo R1 Repeater/Booster extends the effective length of any HDMI cable by recoding the HDMI signal before it outputs the HDMI displays. R1 will remove digital noise in the display. The input of the HDMI repeater is connected with a long HDMI cable from the HDMI device, such as a DVD player, set-top box, game console, personal video recorder and satellite systems. The HDMI Repeater unit can be daisy chain two cables together and create a longer HDMI extension.
How does it work
One HDMI cable –up to 25 meter long – is linked your HDMI source to the HDMI Repeater input. Another cable – up to 5 meter long – is linked the HDMI Repeater output to your HDMI display. The 5V DC power supply is plugged into a nearby wall socket and into the Repeater unit.
Features:
* Extends high definition video and digital audio.
* Extends high definition video and digital audio Compact, portable device.
* Allows to extend the HDMI cable distance, between the sink and source to 40M (35M HDMI cable+5M HDMI cable)
* Supports 720P, 1080i and 1080P resolutions.
* Works with HDMI 1.3 compliant devices.
* Works with HDCP compliant devices.
* Easy to install and simple to use
Specifications:
* Video amplifier speed: 6.75 Gbps.
* Video amplifier bandwidth: 225 MHz.
* Up to 36bit color depth.
* Input video signal: 1.2 Volts p-p.
* Input DDC signal: 5 Volts p-p (TTL).
* HDMI connectors: type A 19-pin female.
* Power supply: DC5V 1A
* Dimensions: 45 x 43 x 19mm
* Weight: 290g
Package Contents:
* The R1 HDMI Repeater
* 5V DC Power Supply(Optional)
* User's Manual.
Note:
- To achieve the best performance, shielded cables are recommended.
- Extender for HDMI 1.3 over CAT6 can also use CAT5e cables, but will be limited to shorter extension distances.
|
|
 |
Xreo X5/X6 HDMI Extender Set is a HDMI extender using Cat-5e/6 cable as transmission media. This enables easy HDMI installation over a long distance. Installer will also have the ability to customize the length by using this extender set. The system will auto adjust feedback, equalization and amplifier, the user does not need to care about the length of the cable.
How does it work
The X5/X6 HDMI Cat-5e/6 Extender transmitter unit sits close to your source, the receiver unit sits close to your HDTV display. Run two Cat-5e or Cat-6 cables between the transmitter and receiver. When the source, the receiver and the display are all powered on and connected, the auto-adjusting extender requires no manual turning or settings.
Features:
* Follow the standard of IEEE-568B.
* Transmission distance reaches up to 50 meters Cat-6 cable or 28meters Cat-5e cable of 1080P.
* Works with HDMI compliant devices.
* Works with HDCP compliant devices.
* Easy to install and simple to use.
Specifications:
* Video amplifier bandwidth: 165 MHz.
* Up to 24bit color depth.
* Input video signal: 1.2 Volts p-p.
* Input DDC signal: 5 Volts p-p (TTL).
* Connectors: RJ45 and HDMI type A 19-pin female
* Power supply: DC 5V 1A
* Dimensions: 71 x 68 x 25mm
* Weight: 690g
Package Contents:
* The HDMI Ca-5e/6 Extender transmitter & receiver.
* 5V DC Power Supply
* User's Manual.
Note:
- To achieve the best performance, shielded cables are recommended.
- Extender for HDMI 1.3 over CAT6 can also use CAT5e cables, but will be limited to shorter extension distances.
|
|
 |
Xreo X5/X6S HDMI Extender Set is a HDMI extender using a single Cat-5e/6 cable as transmission media. This enables easy HDMI installation over a long distance. Installer will also have the ability to customize the length by using this extender set. The system will auto adjust feedback, equalization and amplifier, the user does not need to care about the length of the cable.
How does it work
The X5/X6S HDMI Cat-5e/6 Extender transmitter unit sits close to your source, the receiver unit sits close to your HDTV display. Run a single Cat-5e or Cat-6 cable between the transmitter and receiver. When the source, the receiver and the display are all powered on and connected, the auto-adjusting extender requires no manual turning or settings.
Features:
* Follow the standard of IEEE-568B.
* Transmission distance reaches up to 40 meters single Cat-6 cable of 1080P.
* Works with HDMI compliant devices.
* Works with HDCP compliant devices.
* Easy to install and simple to use.
Specifications:
* Video amplifier bandwidth: 165 MHz.
* Up to 24bit color depth.
* Input video signal: 1.2 Volts p-p.
* Input DDC signal: 5 Volts p-p (TTL).
* Connectors: RJ45 and HDMI type A 19-pin female
* Power supply: DC 5V 2A
* Dimensions: 80 x 60 x 25mm
* Weight: 380g
Package Contents:
* The HDMI Ca-5e/6 Extender transmitter & receiver.
* 2X5V DC Power Supply
* User's Manual.
Note:
- To achieve the best performance, shielded cables are recommended.
- Extender for HDMI 1.3 over CAT6 can also use CAT5e cables, but will be limited to shorter extension distances.
|
|
 |
Xreo X5/X6S+ HDMI Extender Set is a HDMI extender using a single Cat-5e/6 cable as transmission media. This enables easy HDMI installation over a long distance. Installer will also have the ability to customize the length by using this extender set. The system will auto adjust feedback, equalization and amplifier, the user does not need to care about the length of the cable.
How does it work
The X5/X6S+ HDMI Cat-5e/6 Extender transmitter unit sits close to your source, the receiver unit sits close to your HDTV display. Run a single Cat-5e or Cat-6 cable between the transmitter and receiver. When the source, the receiver and the display are all powered on and connected, the auto-adjusting extender requires no manual turning or settings.
Features:
* Follow the standard of IEEE-568B.
* Transmission distance reaches up to 100 meters single Cat-6 cable of 1080P.
* Works with HDMI compliant devices.
* Works with HDCP compliant devices.
* Easy to install and simple to use.
Specifications:
* Video amplifier bandwidth: 165 MHz.
* Up to 24bit color depth.
* Input video signal: 1.2 Volts p-p.
* Input DDC signal: 5 Volts p-p (TTL).
* Connectors: RJ45 and HDMI type A 19-pin female
* Power supply: DC 5V 2A
* Dimensions: 125 x 125 x 30mm
* Weight: 1700g
Package Contents:
* The HDMI Ca-5e/6 Extender transmitter & receiver.
* 2X5V DC Power Supply
* User's Manual.
Note:
- To achieve the best performance, shielded cables are recommended.
- Extender for HDMI 1.3 over CAT6 can also use CAT5e cables, but will be limited to shorter extension distances.
|
|
 |
Xreo W1 HDMI Extender Set is a HDMI extender using wireless transmission.
● Easy switching of multiple HDMI sources (e.g., DVD, STB, A/V receiver) using remote control or the switch button on the switcher.
● Individual LED Display of video source channels.
● Supports 480i, 480p, 720i, 720p, 1080i and 1080p resolution.
● Maintains the highest HDMI single-link video resolution.
● HDCP Compliant
● Low cost solution for home theater integration.
● Plug-and-play. No software installation.
● Install in seconds.
Specifications:
Frequency: 1.65 Gbps (Single Link)
Resolution: Up to 1080p at 60Hz
Input port: HDMI Female Connector
Output port: HDMI Female Connector
Power supply: DC 9V Power
Remote control: IR Sensor
HDCP support: HDCP Compliant
Maximum length of the input HDMI cable: 15FT (28 AWG)
Maximum length of the output HDMI cable: 15FT (28 AWG)
LED CHI~4: Selected Channel Indication.
Select: Push Button.
Packing Content: Gift Box
1. HDMI Switch
2. Remote Controller
3. DC 9V Power Supply
4. User Manual
|
|
|
|
|
|
|
The RoHS Directive stands for "the restriction of the use of certain hazardous substances in electrical and electronic equipment". 
We are committed to providing full supports for our clients. To ensure our clients get the best support, every product is backed up with our 'OK' warranty up to 18 months.
The CE marking is a mandatory European marking for certain product groups to indicate conformity with the essential health and safety requirements set out in European Directives.